| PART |
Description |
Maker |
| GP1A57 GP1A57HR |
Wide Gap Type OPIC Photointerrupter
|
Sharp Corporation
SHARP[Sharp Electrionic Components]
|
| BL-B21V1F |
LED GaP/GaP Green Low current requirement.
17 Bit System Integrating A/D Processor, 16L WIDE SOIC
|
Bright LED Electronics Corp.
|
| OPB800L OPB800L06 |
WIDE GAP SLOTTED OPTICAL SWITCHES
|
OPTEK Technologies
|
| FTR-C210 FTR-C2CB012G FTR-C2GA012G FTR-C2GB012G FT |
SIGNAL RELAY 2 POLES - 2A High Isolation Wide Contact Gap 2.0mm Contact Gap
POWER/SIGNAL RELAY, DPDT, LATCHED, 0.03A (COIL), 5VDC (COIL), 150mW (COIL), 2A (CONTACT), 220VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT
|
Fujitsu Component Limited.
FUJITSU LTD
|
| 7210 8111 7232 8846 6150 7683 7226 7205 8601 7715 |
T-1 subminiature, miniature flanged lamp. 12.0 volts, 0.040 amps.
T-1 subminiature, wire lead lamp. 28.0 volts, 0.024 amps.
T-1 subminiature, wire lead lamp. 5.0 volts, 0.021 amps.
T-1 subminiature, wire lead lamp. 2.5 volts, 0.320 amps.
T-1 subminiature, miniature flanged lamp. 1.5 volts, 0.075 amps.
T-1 subminiature, bi-pin lamp. 5.0 volts, 0.075 amps.
T-1 subminiature, bi-pin lamp. 1.5 volts, 0.075 amps.
T-1 subminiature, wire lead lamp. 1.5 volts, 0.075 amps.
T-1 subminiature, short type lamp. 5.0 volts, 0.075 amps.
T-1 subminiature, wire lead lamp. 5.0 volts, 0.075 amps.
T-1 Subminiature Lamps 的T 1微型灯泡
IC-SM-256K CMOS SRAM
IC,ARINC,429,LINE,RCVR,EXT
Internal power supply connectors (capable of potting), Discrete wire connectors; HRS No: 676-0013-0 00; No. of Positions: 8; Connector Type: Wire
Internal power supply connectors (capable of potting), Discrete wire connectors; HRS No: 676-0027-5 00; No. of Positions: 8; Connector Type: Wire
Internal power supply connectors (capable of potting), Discrete wire connectors; HRS No: 676-0011-5 00; No. of Positions: 6; Connector Type: Wire
to 85; General Description: Housing; Double row; Crimping
Internal power supply connectors (capable of potting), Discrete wire connectors; HRS No: 676-0025-0 00; No. of Positions: 4; Connector Type: Wire
Internal power supply connectors (capable of potting), Discrete wire connectors; HRS No: 676-0008-0 00; No. of Positions: 3; Connector Type: Wire
Internal power supply connectors (capable of potting), Discrete wire connectors; HRS No: 676-0028-8 00; No. of Positions: 10; Connector Type: Wire
Direct mounting on the PCB, Crimping connection, Discrete wire connectors; HRS No: 544-0043-9 00; No. of Positions: 9; Connector Type: Wire; Contact
Internal power supply connectors (capable of potting), Discrete wire connectors; HRS No: 676-0010-2 00; No. of Positions: 5; Connector Type: Wire
Internal power supply connectors (capable of potting), Discrete wire connectors; HRS No: 676-0038-1 00; No. of Positions: 16; Connector Type: Wire
Internal power supply connectors (capable of potting), Discrete wire connectors; HRS No: 676-0009-3 00; No. of Positions: 4; Connector Type: Wire
Internal power supply connectors (capable of potting), Discrete wire connectors; HRS No: 676-0036-6 00; No. of Positions: 12; Connector Type: Wire
CONNECTOR ACCESSORY
T-Bi-Pin T-1 Subminiature Lamps
T-1 subminiature, miniature flanged lamp. 1.35 volts, 0.220 amps.
T-1 subminiature, miniature flanged lamp. 2.5 volts, 0.320 amps.
T-1 subminiature, short type lamp. 5.0 volts, 0.060 amps.
|
International Light Technologies, Inc.
International Light Technologies Inc.
GILWAY[Gilway Technical Lamp]
http://
|
| ISTS802 ISTS802A ISTS802B ISTS802C |
0.5mm APERTURE OPTO-ELECTRONIC SINGLE CHANNEL WIDE GAP SLOTTED INTERRUPTER SWITCHES WITH TRANSISTOR SENSORS
|
Electronic Theatre Controls, Inc.
List of Unclassifed Manufacturers
ISOCOM
|
| AM2520YCO8 AM2520ID08 AM2520YD08 AM2520SGD08 AM252 |
Subminiature solid state lamp. Yellow (peak wavelength 590 nm). Lens type water clear.
Subminiature solid state lamp. Yellow (peak wavelength 590 nm). Lens type yellow diffused.
T-3/4 SINGLE COLOR LED, YELLOW, 1.9 mm
Subminiature solid state lamp. High efficiency red (peak wavelength 627 nm). Lens type red diffused.
Subminiature solid state lamp. Super bright green (peak wavelength 565 nm). Lens type green diffused.
|
Kingbright, Corp.
Kingbright Electronic
|
| BL-B3130A |
LED GaP/GaP Green Low current requirement High efficiency.
|
BRIGHT LED ELECTRONICS CORP
|
| BL-B2337M |
LED GaP/GaP Green Low current requirement High efficiency.
|
BRIGHT LED ELECTRONICS CORP
|
| BL-BHG204 |
LED GaP/GaP Bright Red and Green Low current requirement.
|
BRIGHT LED ELECTRONICS CORP
|
| BL-B5132 |
LED GaP/GaP Bright Red Low current requirement.
|
BRIGHT LED ELECTRONICS CORP
|
| BL-B5134 |
LED GaP/GaP Bright Red Low current requirement.
|
BRIGHT LED ELECTRONICS CORP
|
